CoolSculpting Elite

Northern Virginia, DC and Maryland

Stubborn pockets of fat can sometimes remain even with consistent diet and exercise. CoolSculpting Elite is a non-surgical body contouring treatment that uses controlled cooling to target and eliminate fat cells in specific treatment areas.

At Prolase Medispa, CoolSculpting Elite uses advanced cryolipolysis technology to customize treatment for areas such as the abdomen, flanks, thighs, upper arms, back, bra fat, banana rolls, and under the chin.

FDA-cleared body contouring
Non-surgical
Little to no downtime

CoolSculpting Elite at a Glance

With dual applicators, CoolSculpting Elite can treat two areas simultaneously, helping make treatment more efficient while allowing your provider to develop a personalized body-contouring plan around your goals and anatomy.

CoolSculpting Elite is available exclusively at our Falls Church location.

Treatment DetailInformation
Treatment TypeNon-surgical fat reduction
TechnologyCryolipolysis (controlled cooling)
Treatment AreasAbdomen, flanks, inner/outer thighs, upper arms, back, bra fat, banana rolls, double chin & jawline
Treatment TimeApproximately 35-75 minutes per treatment cycle*
DowntimeLittle to none
Typical Treatment Plan2-3 treatments per area*
ResultsProgressive fat reduction over several weeks to months
ConsultationRequired

*Treatment time and number of treatments vary depending on the treatment area, number of cycles, anatomy, and individual goals. Dual applicators may allow two areas to be treated simultaneously.

CoolSculpting Elite is not a weight-loss treatment and is intended for localized, visible fat bulges rather than overall weight reduction.

What Is CoolSculpting Elite​?

CoolSculpting Elite is a non-invasive body contouring treatment that uses cryolipolysis, a technology that delivers controlled cooling to targeted fat cells beneath the skin.

During treatment, the selected applicator delivers controlled cooling to the targeted area. The treated fat cells are affected by the cooling process, and the body gradually processes and eliminates the treated cells over the weeks and months following treatment.

CoolSculpting Elite does not involve incisions, needles, anesthesia, or surgery.

The treatment is designed for localized fat reduction and body contouring, not weight loss. It also does not remove excess skin or replace surgical procedures such as liposuction or a tummy tuck.

How Does CoolSculpting Elite Work?

During your consultation, your provider evaluates the treatment area and determines which applicator and treatment approach are appropriate for your anatomy and goals.

A gel pad or protective interface is placed over the treatment area before the applicator is positioned. Depending on the applicator, gentle vacuum suction may draw the targeted tissue into the applicator, while other applicators use surface cooling without suction.

Controlled cooling is then delivered to the targeted fat.

You may initially feel intense cold, pulling, tugging, pressure, pinching, tingling, or cramping. As the treatment area becomes numb, these sensations typically decrease.

After treatment, the body gradually processes the affected fat cells. Changes may begin to become noticeable within several weeks, with more significant results generally developing over the following one to three months. Results can continue to develop for several months after treatment.

What Makes CoolSculpting Elite Different?

CoolSculpting Elite is the newer generation of CoolSculpting technology and was introduced with redesigned applicators that allow two areas to be treated at the same time.

The dual-applicator design can help shorten the overall treatment process when multiple areas are being addressed during the same appointment.

Your provider will determine whether simultaneous treatment is appropriate based on your treatment plan and the areas being treated.

CoolSculpting Elite Treatment Areas

Targeted Fat Reduction for the Areas That Bother You Most

CoolSculpting Elite is FDA-cleared to target visible pockets of stubborn fat in multiple areas of the body. Treatment can be customized based on your concerns, body shape, and goals to help create a more contoured appearance.

A consultation is required before treatment. Your provider will determine whether your anatomy and the amount and location of tissue are appropriate for treatment.

Abdomen
Abdomen
Flanks & Love Handles
Flanks & Love Handles
Thighs
Thighs
Upper Arms
Upper Arms
Back & Bra Fat
Bra Fat
Banana Rolls
Banana Rolls
Under the Chin & Jawline
Under the Chin & Jawline

How Much Does CoolSculpting Elite Cost?

CoolSculpting Elite treatment pricing is based on the number of treatment areas and the number of sessions selected.

Individual Area Pricing:

Treatment Area*1 Session2 Sessions3 Sessions
Area 1$850$1500$1950
Area 2$650$1100$1400
Area 3$550$950$1200
Area 4$450$800$1000

* Areas must be purchased in sequential order, starting with Area 1.

  • Full Body CoolSculpting $9900

    3 Sessions

The Full Body CoolSculpting package is designed for clients interested in a comprehensive multi-area body-contouring treatment plan.

Your provider will determine the appropriate treatment areas, applicators, and treatment plan based on your anatomy and goals.

Who Is a Good Candidate for CoolSculpting Elite?

CoolSculpting Elite may be appropriate for adults who:

  • Have localized, visible pockets of fat that remain despite diet and exercise
  • Are near a stable or goal weight
  • Want non-surgical body contouring
  • Have realistic expectations about gradual fat reduction
  • Understand that CoolSculpting is not a treatment for weight loss
  • Have enough tissue in the treatment area for the appropriate applicator to safely treat

CoolSculpting Elite is designed to address localized fat bulges, not obesity or significant overall weight reduction.

When Should CoolSculpting Elite Be Postponed or Avoided?

CoolSculpting Elite should not be performed on individuals with certain cold-related disorders, including:

  • Cryoglobulinemia
  • Cold agglutinin disease
  • Paroxysmal cold hemoglobinuria

You should also tell your provider if you are pregnant, planning pregnancy, have recently had surgery, have a pre-existing hernia, or have known sensitivities or allergies.

Your complete medical history should be reviewed before treatment so your provider can determine whether CoolSculpting Elite is appropriate for you.

CoolSculpting Elite is not intended to treat loose or excess skin throughout the body, and it should not be presented as an alternative to surgical body-contouring procedures when significant skin removal is needed.

Why Choose Prolase for CoolSculpting Elite?

Choosing a body-contouring provider is about more than choosing a device. The way a treatment is planned, the areas selected, and the way your provider approaches your individual anatomy can all influence your experience and treatment plan.

At Prolase Medispa, we take a personalized approach to CoolSculpting Elite. Rather than treating every body the same way, your provider evaluates where you carry localized fat, how your tissue responds to the applicator, and what you want to accomplish before developing your treatment plan.

Treatment Designed Around You

Your body is unique, and your treatment plan should be too. Your provider evaluates your anatomy, treatment areas, and aesthetic goals to determine which areas and applicators make sense for you.

Honest, Personalized Recommendations

We believe a consultation should be about determining what is appropriate for you, not simply deciding how much treatment to sell you. Your provider will discuss what CoolSculpting Elite can realistically accomplish and whether it is the right option for your goals.

A Full-Service Medspa Perspective

Because Prolase offers a wide range of aesthetic treatments, your provider can consider your overall goals rather than looking at one treatment area in isolation. If CoolSculpting Elite is not the best fit for a particular concern, we can discuss other options that may be more appropriate.

Thoughtful Treatment Planning

Body contouring is rarely about treating one isolated spot without considering the areas around it. Your provider can help you determine which treatment areas make sense together and develop a plan designed to create a balanced, natural-looking result.

Advanced CoolSculpting Elite Technology

Prolase uses CoolSculpting Elite with dual applicator technology, allowing two areas to be treated simultaneously when appropriate. This can make multi-area treatment more efficient while still allowing your provider to customize the treatment to your anatomy.

A Team That Knows Aesthetic Treatments

At Prolase, CoolSculpting Elite is part of a broader aesthetic practice rather than a standalone body-contouring service. Our team works with clients across a range of aesthetic goals and can help you understand how different treatments may fit into your overall plan.

Convenient Falls Church Location

CoolSculpting Elite is currently offered at our Falls Church location, making it easy to meet with a Prolase provider, discuss your goals, and create a personalized treatment plan.

CoolSculpting Elite Before and After

See real CoolSculpting results from Prolase Medispa clients.

What Our Clients Say

The Science Behind CoolSculpting Elite

CoolSculpting Elite uses cryolipolysis, a controlled-cooling technology developed to target fat cells beneath the skin.

The treatment selectively cools the targeted tissue while the body’s natural processes gradually remove the affected fat cells over time.

CoolSculpting Elite features redesigned applicators and a dual-applicator system that allows two areas to be treated simultaneously when appropriate.

The technology is FDA-cleared for visible fat bulges in the submental and submandibular areas, thighs, abdomen, flanks, bra fat, back fat, underneath the buttocks, and upper arms.

Preparing for CoolSculpting Elite

Your provider will provide individualized preparation instructions. General preparation may include:

  • Wear comfortable clothing that allows easy access to the treatment area.
  • Arrive with the treatment area clean and free of heavy lotions or oils.
  • Tell your provider about medications, medical conditions, recent procedures, and changes in your health.
  • Inform your provider if you are pregnant or may be pregnant.
  • Tell your provider about any history of sensitivity or reactions to cold.
  • Follow any additional instructions provided during your consultation.

Do not stop prescription medications, including blood thinners, unless specifically instructed to do so by the prescribing provider.

CoolSculpting Elite Aftercare

After treatment:

  • Follow your provider’s instructions for caring for the treated area.
  • Normal daily activities can generally be resumed immediately.
  • Stay adequately hydrated.
  • Mild redness, swelling, bruising, tenderness, tingling, or numbness may occur temporarily.
  • Avoid excessive pressure or irritation to the treatment area if it is tender.
  • Follow your provider’s recommendations regarding exercise and activity.
  • Contact Prolase if you experience an unexpected or concerning reaction.

Temporary changes in sensation can persist for several weeks in some patients. Your provider will explain what to expect based on your treatment area and individual treatment plan.

What Results Can You Expect From CoolSculpting Elite?

CoolSculpting Elite results are gradual. The body needs time to process and eliminate the treated fat cells, so the final appearance does not occur immediately after treatment.

The official CoolSculpting information reports that changes may begin as early as approximately four weeks after treatment, with more noticeable results generally developing over one to three months. Results may continue to develop for several months.

After Treatment
The treated area may initially appear swollen, firm, numb, red, or temporarily different in contour. These effects generally improve as the area recovers.

Several Weeks After Treatment
As the body processes the treated fat cells, gradual changes in the appearance of the treatment area may become noticeable.

One to Three Months
More significant results are typically visible as the body continues processing the treated fat cells.

Long-Term Results
The fat cells affected by treatment are eliminated from the treated area. However, remaining fat cells can enlarge with significant weight gain, so maintaining a stable weight and healthy lifestyle can help maintain your overall body-contouring results.

CoolSculpting Elite does not prevent future weight gain or replace healthy nutrition and exercise.

What Happens During a CoolSculpting Elite Treatment?

Your provider will begin by evaluating the treatment area and cleansing the skin.

  1. Consultation & Treatment Planning
    Your provider evaluates your treatment areas, anatomy, skin and tissue characteristics, and aesthetic goals. Because CoolSculpting Elite is designed for localized fat reduction rather than weight loss, your provider will determine whether the visible fat bulge is appropriate for cryolipolysis.
  2. Treatment Area Preparation
    The treatment area is marked according to the selected applicator and treatment plan. A protective gel pad or interface is applied before the applicator is positioned.
  3. Controlled Cooling
    The applicator delivers controlled cooling to the targeted area. Depending on the applicator used, you may experience pulling, tugging, pressure, pinching, cold, tingling, aching, or cramping. These sensations generally decrease as the area becomes numb.
  4. Treatment Completion
    After the cooling cycle is complete, the applicator is removed. Depending on the treatment area and protocol, your provider may perform a brief manual massage of the treated area.
  5. Return to Your Routine
    Because CoolSculpting Elite is non-invasive, there is generally little to no downtime, and many clients can return to normal daily activities immediately.

Is One CoolSculpting Elite Treatment Enough?

Treatment plans vary based on the treatment area, amount of localized fat, anatomy, and desired outcome.

Some clients may achieve their desired result with one treatment cycle in an area, while others may benefit from additional treatments.

Many patients receive at least two treatment sessions, commonly spaced approximately 4–8 weeks apart.

Your provider will recommend the number and spacing of treatments based on your individual treatment plan rather than applying the same number of sessions to every client.

Frequently Asked Questions

Is CoolSculpting Elite a weight-loss treatment?

No. CoolSculpting Elite is a non-surgical body-contouring treatment designed to reduce visible, localized fat bulges. It is not intended to treat obesity or produce overall weight loss.

CoolSculpting Elite uses controlled cooling to target fat cells beneath the skin. The body then gradually processes the treated cells over the following weeks and months.

Up to 20–25% fat-layer reduction was observed in a small clinical study at two and six months after treatment. Individual results vary, and this figure should not be interpreted as a guaranteed result.

Depending on the area and number of treatment cycles, a treatment can take approximately 35 minutes or longer. Dual applicators may allow two areas to be treated simultaneously.

You may initially feel intense cold, pulling, tugging, pressure, pinching, tingling, aching, or cramping. These sensations generally decrease as the treatment area becomes numb. Individual comfort varies.

CoolSculpting Elite is non-invasive and generally requires little to no downtime. Many clients can return to their normal activities immediately, although temporary swelling, redness, tenderness, bruising, numbness, or sensitivity may occur.

Some changes may become noticeable as early as approximately four weeks after treatment. More significant results generally develop over one to three months, although the body may continue processing treated fat cells for several months.

Treatment plans vary. Some clients may achieve their desired result with one treatment cycle in an area, while others may benefit from additional sessions. Many patients receive at least two treatment sessions, commonly spaced 4–8 weeks apart.

The fat cells affected by treatment are eliminated from the treated area. However, the remaining fat cells can enlarge with weight gain, so maintaining a stable weight can help maintain the appearance of your results.

CoolSculpting Elite is primarily intended to reduce visible fat bulges. It does not remove significant excess skin. The device is also FDA-cleared to affect the appearance of lax tissue when treating the submental area.

No. CoolSculpting Elite and liposuction are different procedures. CoolSculpting Elite is non-invasive and designed for localized fat reduction, while liposuction is a surgical procedure that physically removes fat.

CoolSculpting Elite is designed to treat visible fat bulges, not cellulite itself. If cellulite is your primary concern, your provider can discuss other treatment options that may be more appropriate.

Yes. CoolSculpting Elite can be used by appropriate male and female patients seeking reduction of localized fat bulges in FDA-cleared treatment areas.

Yes. CoolSculpting Elite is FDA-cleared for visible fat bulges beneath the chin and jawline.

A banana roll is the pocket of fat located directly underneath the buttocks. CoolSculpting is FDA-cleared for treatment of this area.

Yes. CoolSculpting Elite does not prevent future weight gain. While treated fat cells are eliminated, remaining fat cells can enlarge if you gain weight.

CoolSculpting Elite is FDA-cleared for specific treatment areas, but it is not appropriate for everyone. Your provider should review your medical history and treatment goals before treatment.

CoolSculpting Elite should not be used in people with cryoglobulinemia, cold agglutinin disease, or paroxysmal cold hemoglobinuria. Additional medical considerations may require treatment to be postponed or avoided.

Temporary redness, swelling, bruising, tenderness, numbness, tingling, cramping, or sensitivity can occur after treatment. Some patients may experience longer-lasting changes in sensation. Rare complications can also occur, so your provider should review the risks and benefits with you before treatment.

CoolSculpting Elite pricing depends on the number of treatment areas and sessions selected.

Current Prolase pricing is:

  • Area 1: $850 for 1 session · $1,500 for 2 sessions · $1,950 for 3 sessions
  • Area 2: $650 for 1 session · $1,100 for 2 sessions · $1,400 for 3 sessions
  • Area 3: $550 for 1 session · $950 for 2 sessions · $1,200 for 3 sessions
  • Area 4: $450 for 1 session · $800 for 2 sessions · $1,000 for 3 sessions

Areas must be purchased sequentially, beginning with Area 1, followed by Area 2, Area 3, and Area 4.

  • Full Body CoolSculpting: 3 sessions for $9,900.

A consultation is required to determine the appropriate treatment areas and treatment plan.

CoolSculpting Elite is currently available at Prolase Medispa’s Falls Church location.

CoolSculpting Elite in Northern Virginia

CoolSculpting Elite is available exclusively at the Falls Church location. Contact Prolase to schedule a consultation and determine whether non-surgical fat reduction is appropriate for your treatment goals.

Ready to Contour Without Surgery?

If you have localized pockets of fat that have been resistant to diet and exercise, CoolSculpting Elite may be an option for targeted, non-surgical body contouring.

Meet with a Prolase provider to discuss your treatment areas, goals, expected results, and personalized treatment plan.